Development and Validation of Matrix of Chemistry, Manufacturing, and Control (MoCMC) System for Intramammary Drug Products (IMM).

PURPOSE: Products formulated for intramammary (IMM) infusion are intended for the delivery of therapeutic moieties directly into the udder through the teat canal to maximize drug exposure at the targeted clinical site, the mammary gland, with little to no systemic drug exposure. Currently, to our knowledge, there has been no in-vitro matrix system available to differentiate between IMM formulations. Our goal is to develop A custom tailored in-vitro "Matrix of Chemistry, Manufacturing and Control" (MoCMC) System to be a promising future tool for identifying inequivalent IMM formulations. MoCMC can detect inter and intra batch variabilities, thereby identifying potential generics versus brand product similarities or differences with a single numeric value and a specific & distinctive fingerprint. METHODS: The FDA-approved IMM formulation, SPECTRAMASTⓇ LC, was selected as the reference product for the MoCMC. Twelve in-house test formulations containing ceftiofur hydrochloride were formulated and characterized. The MoCMC was developed to include six input parameters and three output parameters. The MoCMC system was used to evaluate and compare SPECTRAMASTⓇ LC with its in-house formulations. RESULTS: Based on the MoCMC generated parameters, the distinctive fingerprints of MoCMC for each IMM formulations, and the statistical analyses of MCI and PPI values, in-house formulations, F-01 and F-02 showed consistency while the rest of in-house formulations (F-03-F-12) were significantly different as compared to SPECTRAMASTⓇ LC. CONCLUSION: This research showed that the MoCMC approach can be used as a tool for intra batch variabilities, generics versus brand products comparisons, post-approval formulations changes, manufacturing changes, and formulation variabilities.

Bioavailability assessment of a brompheniramine taste-masked pediatric formulation in a juvenile porcine model.

A brompheniramine taste-masked pediatric formulation was developed as part of the National Institutes of Health Pediatric Formulation Initiative to help address low patient compliance caused by the bitter taste of many adult formulations. To confirm that the taste-masked formulation can provide a similar pharmacological effect to the previous marketed adult formulations, a juvenile porcine model was used to screen the model pediatric formulation to compare the bioavailability between the marketed brompheniramine maleate and the taste-masked maleate/tannate formulation. Pigs were dosed orally with both formulations and blood samples were obtained from 0 to 48 h. Plasma samples were prepared and extracted using solid-phase extraction. The mass spectrometer was operated under selected ion monitoring mode. The selected ion monitoring channels were set to m/z 319.1 for brompheniramine and m/z 275.2 for the internal standard chlorpheniramine. Calibration curves were linear over the analytical range 0.2-20 ng/ml (r2 > 0.995) for brompheniramine in plasma. The intra- and inter-day accuracies were between 98.0 and 105% with 5.73% RSD precision. The bioanalytical method was successfully applied to a preclinical bioavailability study. The bioavailability profiles were not significantly different between the two formulations, which demonstrates that taste-masking with tannic acid is a promising approach for formulation modification for pediatric patients.

In Vitro and In Vivo testing of 3D-Printed Amorphous Lopinavir Printlets by Selective Laser Sinitering: Improved Bioavailability of a Poorly Soluble Drug.

The aim of this paper was to investigate the effects of formulation parameters on the physicochemical and pharmacokinetic (PK) behavior of amorphous printlets of lopinavir (LPV) manufactured by selective laser sintering 3D printing method (SLS). The formulation variables investigated were disintegrants (magnesium aluminum silicate at 5-10%, microcrystalline cellulose at 10-20%) and the polymer (Kollicoat® IR at 42-57%), while keeping printing parameters constant. Differential scanning calorimetry, X-ray powder diffraction, and Fourier-transform infrared analysis confirmed the transformation of the crystalline drug into an amorphous form. A direct correlation was found between the disintegrant concentration and dissolution. The dissolved drug ranged from 71.1 ± 5.7% to 99.3 ± 2.7% within 120 min. A comparative PK study in rabbits showed significant differences in the rate and extent of absorption between printlets and compressed tablets. The values for Tmax, Cmax, and AUC were 4 times faster, and 2.5 and 1.7 times higher in the printlets compared to the compressed tablets, respectively. In conclusion, the SLS printing method can be used to create an amorphous delivery system through a single continuous process.

Patient In-Use Stability Testing of FDA-Approved Metformin Combination Products for N-Nitrosamine Impurity.

Between February 2020 and January 2022, the Food and Drug Administration (FDA) recalled 281 metformin extended-release products due to the presence of N-nitrosodimethylamine (NDMA) above the acceptable daily intake (ADI, 96 ng/day). Our previous studies indicated presence of NDMA levels above ADI in both metformin immediate and extended-release products. When metformin products have NDMA impurities, it is indispensable to check for the same impurities in metformin combination products. Therefore, the objective of the present study was to evaluate in-use stability of commercial metformin combination products for NDMA. For this purpose, metformin products in combination with glyburide (GB1-GB12), glipizide (GP1-GP8), pioglitazone (P1-P3), alogliptin (A1, A2), and linagliptin (L1, L2) were repacked in pharmacy vials, stored at 30°C/75% RH for 3 months, and monitored for NDMA impurity. The NDMA level varied from 0 to 156.8 ± 32.8 ng/tablet initially and increased to 25.4 ± 5.1 to 455.0 ± 28.4 ng/tablet after 3 months of exposure to in-use condition. Initially, 18 products have NDMA level below ADI limit before exposure which decreased to 7 products (GB5, GP3, GP5, A1, A2, L1, and L2) meeting specification. In conclusion, in-use stability study provides quality and safety risk assessment of drug products where nitroso impurities are detected in the probable condition of use.

Development and Validation of Discriminatory In-vitro Release Method for Intramammary Drug Product.

PURPOSE: Intramammary (IMM) formulations are locally acting and delivered intracisternally into the udder. No pharmacopeial in-vitro release method is available to differentiate between the IMM formulations. Our research aim is to develop in-vitro release methods that discriminate different IMM formulations (SPECTRAMAST® LC and in-house formulations). METHODOLOGY: Different in-house formulations were developed to simulate SPECTRAMAST® LC generics. SPECTRAMAST® LC and the in-house formulations were characterized for physicochemical attributes, such as particle size, rheology, drug content, sedimentation rate, and flocculation rate. The in-vitro release method was optimized by evaluating drug release using USP apparatuses 1, 2 (with and without enhancer/customized cells), and 4. Various test parameters, including medium effect (whole homogenized bovine milk versus aqueous buffer), medium volume (200-900 mL), and rotational speed (50-200 rpm) were investigated. RESULTS: Two potential in-vitro systems can be used as discriminatory methods for IMM formulations: USP apparatus 2 with the IMM formulation loaded into two containers a) customized formulation container (83.1 cm in height and 56.4 cm in width) or b) enhancer cells with their top adapted with mesh #40 (rotation speed:125 rpm and 900 mL of whole homogenized bovine milk). The release profile of SPECTRAMAST® LC at 1 h (99.8%) was not significantly different from formulations with similar physicochemical characteristics F-01 (99.1%) and F-02 (100.5%). Formulation with different physicochemical characteristics F-03 (44.3%) and F-04 (57.2%) showed slower release (1 h) than SPECTRAMAST® LC (98.8%). CONCLUSION: The developed in-vitro release methods can be used as a potential tool for in-vitro comparability evaluations for IMM formulations.

Preparation and Characterization of 3D-Printed Dose-Flexible Printlets of Tenofovir Disoproxil Fumarate.

The aim of this work was to design pediatric-friendly, dose-flexible orally disintegrating drug delivery systems (printlets) of the antiviral drug tenofovir disoproxil fumarate (TDF) by selective laser sintering (SLS) for potential use in hospitals along with other antiviral drugs. In order to obtain a consistent quality of printlets with desired properties, it is important to understand certain critical quality attributes for their main and interactions effect. The printlets were optimized by Box-Behnken's design of the experiment by varying process variables while keeping the composition constant. The composition contained 16.3% TDF, 72.7% polyvinyl pyrrolidone K16-18, 8% magnesium aluminum silicate, 3% Candurin® NXT Ruby Red, and 0.3% colloidal silicon dioxide. The process variables studied were surface (X1), chamber temperatures (X2), and laser scanning speed (X3). The range of variable levels was 75-85°C for X1, 50-70°C for X2, and 200-240 mm/s for X3, respectively. The responses studied were hardness, disintegration time, dissolution, physiochemical, and pharmacokinetic characterization. X-ray powder diffraction indicated partial or complete conversion of the crystalline drug into amorphous form in the printlets. Comparative pharmacokinetics between Viread® (generic) and printlets in rats were superimposable. Pharmacokinetic parameters showed statistically insignificant differences between the two formulations in terms of Tmax, Cmax, and AUC of (p > 0.05). Printlets were bioequivalent to Viread® as per FDA bioequivalence criteria. Thus, the SLS printing method showed the fabrication of dose-flexible printlets with quality, and in vivo performance equivalent to commercial tablets.

Application of Sucrose Acetate Isobutyrate in Development of Co-Amorphous Formulations of Tacrolimus for Bioavailability Enhancement.

The focus of the present work was to develop co-amorphous dispersion (CAD) formulations of tacrolimus (TAC) using sucrose acetate isobutyrate as a carrier, evaluate by in vitro and in vivo methods and compare its performance with hydroxypropyl methylcellulose (HPMC) based amorphous solid dispersion (ASD) formulation. CAD and ASD formulations were prepared by solvent evaporation method followed by characterization by Fourier transformed infrared spectroscopy, X-ray powder diffraction (XRPD), differential scanning calorimetry (DSC), dissolution, stability, and pharmacokinetics. XRPD and DSC indicated amorphous phase transformation of the drug in the CAD and ASD formulations, and dissolved more than 85% of the drug in 90 min. No drug crystallization was observed in the thermogram and diffractogram of the formulations after storage at 25 °C/60% RH and 40 °C/75% RH. No significant change in the dissolution profile was observed after and before storage. SAIB-based CAD and HPMC-based ASD formulations were bioequivalent as they met 90% confidence of 90-11.1% for Cmax and AUC. The CAD and ASD formulations exhibited Cmax and AUC 1.7-1.8 and 1.5-1.8 folds of tablet formulations containing the drug's crystalline phase. In conclusion, the stability, dissolution, and pharmacokinetic performance of SAIB-based CAD and HPMC-based ASD formulations were similar, and thus clinical performance would be similar.

In Vitro and In Vivo Characterization of the Transdermal Gel Formulation of Desloratadine for Prevention of Obesity and Metabolic Syndrome.

Chronic use of antihistamines can induce abnormalities in lipid absorption with potential excessive accumulation of lipids in the mesentery that can lead to the development of obesity and a metabolic syndrome. The focus of the present work was to develop a transdermal gel formulation of desloratadine (DES) to prevent/reduce obesity and metabolic syndromes. Nine formulations were prepared to contain hydroxypropyl methylcellulose (2-3%), DES (2.5-5.0%), and Transcutol® (15-20%). The formulations were evaluated for cohesive and adhesive properties, viscosity, drug diffusion through synthetic and pig ear skin, and pharmacokinetics in New Zealand white rabbits. Drug permeation was faster through the skin compared to synthetic membranes. The drug had good permeation, as indicated by very short lag time (0.08-0.47 h) and high flux (59.3-230.7 µg/cm2.h). The maximum plasma concentration (Cmax) and area under the curve (AUC) of transdermal gel formulations were 2.4 and 3.2 fold that of the Clarinex tablet formulation. In conclusion, as indicated by the higher bioavailability, transdermal gel formulation of DES may decrease the dose of the drug, compared to commercial formulation. It has the potential to reduce or eliminate metabolic syndromes associated with oral antihistamine therapy.

Nitroso Impurities in Drug Products: An Overview of Risk Assessment, Regulatory Milieu, and Control Strategy.

Many nitrosamines have been recognized to be carcinogenic for many decades. Despite the fact that several nitrosamine precursors are frequently used in the manufacturing of pharmaceutical products, their potential presence in pharmaceutical products has previously been overlooked due to a lack of understanding on how they form during the manufacturing process. From the risk assessment, it is clear that nitrosamines or their precursors may be present in any component of the finished dosage form. As a risk mitigation strategy, components with a high potential to form nitrosamine should be avoided. In the absence of suitable alternatives, sufficient measures to maintain nitrosamines below acceptable intake levels must be applied. Excipient manufacturing pathways must be extensively studied in order to identify probable excipient components that may contribute to nitrosamine formation. The manufacturers must not solely rely on pharmacopeial specifications for APIs and excipients, rather, they should also develop and implement additional strategies to control nitrosamine impurities. The formulation can be supplemented with nitrosating inhibitors, such as vitamin C, to stop the generation of nitrosamine. The purpose of this review is to identify key risk factors with regard to nitrosamine formation in pharmaceutical dosage forms and provide an effective control strategy to contain them below acceptable daily intake limits.

Pyrimethamine 3D printlets for pediatric toxoplasmosis: design, pharmacokinetics, and anti-toxoplasma activity.

OBJECTIVES: The focus of the present research is to develop printlet formulations of pyrimethamine (PMT). METHODS: Printlets formulation of PMT were developed by screening design by varying laser scanning speed, Kollidon® VA 64, polyvinylpyrrolidone, and disintegrant. RESULTS: Laser scanning speed, Kollidon® VA, and disintegrant had statistically significant effect on hardness, disintegration time, and/or dissolution (p < 0.05). Dissolution was almost 100% in 30 min. X-ray powder diffraction indicated partial amorphous transformation of the crystalline drug. Pharmacokinetic and anti-toxoplasma activity profiles of the printlets and compressed tablets were superimposable with no statistical difference (p > 0.05). CONCLUSION: Clinical performance of the printlets would be similar to the compressed tablets.

Data integrity issues in pharmaceutical industry: Common observations, challenges and mitigations strategies.

Data integrity (DI) reaffirms the pharmaceutical industry's commitment to manufacture drugs that are safe, effective and fulfil quality standards. At the same time, DI is a crucial tool for regulatory authorities to use in protecting public health. Recent FDA Form-483 observations and warning letters indicate that DI is the main issue the pharmaceutical industry is currently dealing with. Failure to comply with DI requirements may result in a high number of un-validated results, which may cause post-marketing issues and frequent product recalls. To address the underlying causes of DI problems, a comprehensive approach is necessary. The majority of DI issues are caused by poor quality culture, organizational or individual behaviour, leadership, processes, or technology. DI should be effectively integrated into the quality management system, and it should apply to both paper and electronic records. Employees should be trained on 21 CFR Part 11. Consistent review and audit are required to ensure that procedures are followed and audit trails are generated. Electronic systems, in addition to being an efficient solution (system integration, data verification at both input and output, security), offer advantages over traditional paper-based systems in terms of improved compliance with DI regulatory requirements. For example, many electronic system platforms provide enhanced security features and audit trail capabilities. Finally, management support for data governance is essential for successful implementation of DI. This article reviews commonly observed deviations by FDA pertaining to DI and discusses measures to be undertaken to avoid them.

Formulation Characterization and Pharmacokinetic Evaluation of Amorphous Solid Dispersions of Dasatinib.

The aim of this study was to improve the physicochemical properties and oral bioavailability of dasatinib (DST) by the amorphous solid dispersion (ASD) approach using cellulose acetate butyrate (CAB) as a carrier. Various formulations of ASD (DST:CAB 1:1 to 1:5) were prepared by the solvent evaporation method. ASDs were characterized for physicochemical attributes, stability and pharmacokinetics. Scanning electron microscopy, Fourier transformed infrared, X-ray powder diffraction, and differential scanning calorimetry confirmed the transformation of the crystalline drug into amorphous phase. ASD formation resulted in a 3.7−4.9 fold increase in dissolution compared to DST or physical mixture. The ASDs formulation exhibited relative stability against transformation from the unstable amorphous phase to a stable crystalline phase that was indicated by spectral and X-ray powder diffraction data, and insignificant (p > 0.05) decrease in dissolution. Tmax, Cmax and AUC0-∞ of ASD were 4.3-fold faster and 2.0 and 1.5 fold higher than the corresponding physical mixture. In conclusion, the ASD of DST significantly improved dissolution and oral bioavailability which may be translated into a reduction in dose and adverse events.

Augmented Renal Clearance and Hypoalbuminemia-Induced Low Vancomycin Trough Concentrations in Febrile Neutropenic Patients With Hematological Malignancies.

INTRODUCTION: Vancomycin administration in individuals with hematological malignancy or neutropenia is associated with a suboptimal trough concentration. Nonetheless, most studies did not distinguish whether low vancomycin trough concentrations were due to hematological malignancies or neutropenia. This study aimed to determine the association between types of hematological malignancy and febrile neutropenia with low vancomycin concentrations. METHODS: The present retrospective chart review study was conducted by using clinical data adopted from computerized physician order entries (BestCare®) for all of the patients who received intravenous vancomycin treatment between January 2017 and December 2020 at King Abdulaziz Medical City in Jeddah. RESULTS: Out of the 296 patients, 217 were included. There was no significant association between the type of hematological malignancy and the incidence of a low trough concentration (p > 0.05), while a significant association between febrile neutropenia and the incidence of a low trough concentration was observed (p < 0.05). Furthermore, the predictors for a low trough among febrile neutropenic patients were creatinine clearance (CrCI) and a low albumin concentration. In addition, there was a significant association between febrile neutropenia and augmented renal clearance (p < 0.05). CONCLUSIONS: The findings of this study conclude that febrile neutropenia is associated with low vancomycin concentrations. Interestingly, augmented renal clearance was observed in most of the febrile neutropenia patients with a significant association, which is considered the main driver for a low trough in neutropenic patients.

HIV-1 Tat and cocaine impact astrocytic energy reservoirs and epigenetic regulation by influencing the LINC01133-hsa-miR-4726-5p-NDUFA9 axis.

Clinical research has proven that HIV-positive (HIV+) individuals with cocaine abuse show behavioral and neurocognitive disorders. Noncoding RNAs (ncRNAs), such as long ncRNAs (lncRNAs) and microRNAs (miRNAs), are known to regulate gene expression in the contexts of HIV infection and drug abuse. However, there are no specific lncRNA or miRNA biomarkers associated with HIV-1 Transactivator of transcription protein (Tat) and cocaine coexposure. In the central nervous system (CNS), astrocytes are the primary regulators of energy metabolism, and impairment of the astrocytic energy supply can trigger neurodegeneration. The aim of this study was to uncover the roles of lncRNAs and miRNAs in the regulation of messenger RNA (mRNA) targets affected by HIV infection and cocaine abuse. Integrative bioinformatics analysis revealed altered expression of 10 lncRNAs, 10 miRNAs, and 4 mRNA/gene targets in human primary astrocytes treated with cocaine and HIV-1 Tat. We assessed the alterations in the expression of two miRNAs, hsa-miR-2355 and hsa-miR-4726-5p; four lncRNAs, LINC01133, H19, HHIP-AS1, and NOP14-AS1; and four genes, NDUFA9, KYNU, HKDC1, and LIPG. The results revealed interactions in the LINC01133-hsa-miR-4726-5p-NDUFA9 axis that may eventually help us understand cocaine- and HIV-1 Tat-induced astrocyte dysfunction that may ultimately result in neurodegeneration.

Very-Rapidly Dissolving Printlets of Isoniazid Manufactured by SLS 3D Printing: In Vitro and In Vivo Characterization.

The focus of this research was to understand the effects of formulation and processing variables on the very-rapidly dissolving printlets of isoniazid (INH) manufactured by the selective laser sintering (SLS) three-dimensional (3D) printing method, and to characterize their physicochemical properties, stability, and pharmacokinetics. Fifteen printlet formulations were manufactured by varying the laser scanning speed (400-500 mm/s, X1), surface temperature (100-110 °C, X2), and croscarmellose sodium (CCS, %, X3), and the responses measured were weight (Y1), hardness (Y2), disintegration time (DT, Y3), and dissolution (Y4). Laser scanning was the most important processing factor affecting the responses. DT was very rapid (≥3 s), and dissolution (>99%) was completed within 3 min. The root-mean-square error in the studied responses was low and analysis of variance (ANOVA) was statistically significant (p < 0.05). X-ray micro-computed tomography (micro-CT) images showed very porous structures with 24.6-34.4% porosity. X-ray powder diffraction and differential scanning calorimetry data indicated partial conversion of the crystalline drug into an amorphous form. The printlets were stable at 40 °C/75% RH with no significant changes in assay and dissolution. Pharmacokinetic profiles of the printlets and compressed tablets were superimposable. In conclusion, the rapidly dissolving printlets of the INH were stable, and oral bioavailability was similar to that of compositionally identical compressed tablets.

In-use stability assessment of FDA approved metformin immediate release and extended release products for N-Nitrosodimethylamine and dissolution quality attributes.

Metformin is a widely used first-line oral antidiabetic agent. TheFood and Drug Administration (FDA) confirmed the presence of the ofN-nitrosodimethylamine (NDMA) impurity, a carcinogenic, above the acceptable daily intake (ADI, 96 ng/day) in certain metformin products. The objective of the present study was to assess in-use stability of commercial metformin products for NDMA and dissolution quality attributes. Four immediate-release (M1-M4) and six extended-rerelease (M5-M10) metformin products were evaluated in the stability testing. All products were repacked in pharmacy vials and stored at 30 °C/75% RH for 12 weeks. Five products (M2, M3, M5, M7 and M10) had NDMA level above ADI limit (96 ng/day) before in-use stability exposure. NDMA in M2 (1164 ± 52.9 ng/tablet) and M3 (3776 ± 351.9 ng/tablet) products were 12 and 39 folds of ADI, respectively. Similarly, ER products, M5 (191 ± 94.1 ng/tablet), M7 (1473 ± 47.3 ng/tablet) and M10 (423 ± 55.8 ng/tablet) exhibited NDMA of 1.9, 15.3 and 4.4 folds of ADI, respectively. The impurity level significantly (p < 0.05) increased after 12-week stability exposure to 2.72, 2.47, 2.23 and 2.78 folds of initial values in M2, M3, M7 and M10. In summary, these findings suggested that carcinogenic impurity generation was affected by in-use stability condition exposure and it is expected that several more products currently in the market may also be recalled soon.

In-Situ Implant Formulation of Laurate and Myristate Prodrugs of Dolutegravir for Ultra-Long Delivery.

The focus of present work was to synthesize prodrugs of dolutegravir (DTG) for ultra-long delivery purpose. The prodrug was synthesized by esterification of hydroxyl group with carboxyl group of fatty acid (lauric or myristic acid). The prodrugs were characterized by differential scanning calorimetry, X-ray powder diffraction, nuclear magnetic resonance, Fourier transformed infrared, near infrared-chemical imaging, pH-solubility, partition coefficient, and stability (solid and liquid). Stability studies were performed by exposing the powder drugs to 40°C/75% RH for three months and buffer solutions at room temperature for 72 h. The prodrugs and drug were formulated into in-situ implant using biodegradable polymer. Thermal, spectral, and diffractometric data indicated formation of new chemical and solid forms. Formation of prodrugs resulted in lowering of melting point of DTG from 191.1°C to 163.7 and 140.7°C for DTG-Laurate and DTG-Myristate prodrugs, respectively. A decrease in solubility of 18.2-115.9 and 124.5-1594.9 folds was observed for DTG-Laurate and DTG-Myristate, respectively compared to DTG. Similarly, the prodrugs were highly lipophilic compared to DTG. Solid-state and pH-stability profiles of DTG and prodrugs were comparable. Implant formulation released 60.1% in 77 days compared to 95.6% in 35 days in the case of DTG-Myristate and DTG, respectively. In summary, combining prodrug and drug delivery approaches can be utilized for delivering drug for ultra-long period.

HIV-1 Tat and cocaine coexposure impacts piRNAs to affect astrocyte energy metabolism.

Aim: To understand the effect of HIV infection and cocaine exposure on piRNA expression in human primary astrocytes. Materials & methods: We used small RNA sequencing analysis to investigate the impacts of HIV-1 Tat and cocaine coexposure on the expression of piRNAs in human primary astrocytes. Results: We identified 27,700 piRNAs and analyzed them by small RNA next-generation sequencing. A total of 239 piRNAs were significantly altered by HIV-1 Tat and cocaine coexposure. We also identified PIWIL1, PIWIL2, PIWIL3 and PIWIL4 as interacting partners of piRNAs that were affected by cocaine and HIV-1 Tat coexposure. Epigenetic changes in the expression levels of these piRNA targets were associated with Kyoto Encyclopedia of Genes and Genomes pathways of energy metabolism and neurodegeneration. Conclusion: These findings provide evidence that cocaine exposure and HIV infection affect the expression levels of piRNA, PIWIL1, PIWIL2, PIWIL3 and PIWIL4.

Development and Validation Of A Discriminatory Dissolution Method for Portioned Moist Snuff and Snus.

Portioned moist snuff and snus, two subcategories of smokeless tobacco products (STP) were dissolution tested as a quality control test. A USP Apparatus 4 was employed to develop and validate the method. The method was assessed based on time to reach nicotine dissolution plateau, percentage difference between two profiles at each time point, relative standard deviation (RSD), and f1 (similarity) and f2 (dissimilarity) values. Based on these criteria, 200 ml volume and 8 ml/min flow were found be discriminatory. The amount of nicotine dissolved from the nine products varied widely (2.0-3.4, 2.1-4.1, 3.3-4.6, 5.5-6.6, 6.9-9.1, 11.5-14.2, 12.5-14.6, 14.0-15.5, and 15.5-19.6 mg/pouch at 60 min). RSDs of the dissolution ranges were more than 20% at earlier time points and less than 20% at later timepoints. The developed method produced distinct profiles for all the tested products, which was further confirmed by f1>15 and f2<50 values. In conclusion, the developed method was discriminatory and can be employed as a quality control test and to differentiate among moist snuff and snus products.